Inconel may be your answer to high-temperature applications requiring resistance to oxidation and spalling where platinum has traditionally been relied upon. In addition to its resistance to corrosive oxidation, the alloy is also unaffected by rapid changes from hot to cold and it also retains its mechanical strength at elevated temperatures.
The high resistance of Inconel to oxidation, carburization or sulfidation make it well suited for vessels used in determining moisture, volatiles, fixed-carbon and ash in most coal and coke products, or wood pulp or fiber.
It has also been recommended for use in drying and ashing biological materials whose residues are soluble in dilute acid or alkali for subsequent analysis. Trace-level determinations of principal constituent elements are excluded.
Smoothing and reshaping after use is not necessary. Uniform heating is assured since the inherent strength of Inconel laboratory ware precludes the necessity of reinforced rims and thicker bottoms as is the case with platinum in some instances. The vessels can be cleaned simply by scouring with sea-sand or some other mild abrasive.
Standard wall thickness is 0.040”; heavier wall 0.050” thickness is also available.
|
Low Form |
|
Capacity, ml |
Top O.D., mm (in) |
Bottom O.D., mm (in) |
Depth, mm (in) |
Part Number* |
|
15 |
36 (1.41) |
32 (1.26) |
23 (0.90) |
30-0015LF |
|
20 |
35 (1.41) |
32 (1.26) |
32 (1.27) |
30-0020LF |
|
25 |
47 (1.85) |
40 (1.58) |
23 (0.90) |
30-0025LF |
|
35 |
47 (1.85) |
40 (1.58) |
30 (1.18) |
30-0035LF |
|
45 |
47 (1.85) |
40 (1.58) |
35 (1.38) |
30-0045LF |
|
55 |
47 (1.85) |
40 (1.58) |
42 (1.64) |
30-0055LF |
|
75 |
51 (2.02) |
44 (1.75) |
42 (1.67) |
30-0075LF |
|
100 |
59 (2.34) |
53 (2.07) |
46 (1.81) |
30-0100LF |
|
250 |
83 (3.57) |
72 (2.83) |
60 (2.36) |
30-0250LF |
|
500 |
102 (4.01) |
89 (3.51) |
66 (2.61) |
30-0500LF |
|
1000 |
152 (6.00) |
144 (5.67) |
95 (3.75) |
30-1000LF |
|
1500 |
152 (6.00) |
144 (5.67) |
108 (4.25) |
30-1500LF |
* For the matching crucible cover part number, simply add the letter “C” to the end of the crucible part number.
|
Straight Wall |
|
Capacity, ml |
O.D., mm (in) |
Depth, mm (in) |
Part Number* |
|
5 |
21 (0.83) |
19 (0.75) |
30-0005SW |
|
10 |
27 (1.07) |
22 (0.87) |
30-0010SW |
|
15 |
33 (1.32) |
22 (0.87) |
30-0015SW |
|
20 |
33 (1.32) |
29 (1.14) |
30-0020SW |
|
25 |
47 (1.84) |
22 (0.87) |
30-0025SW |
|
35 |
47 (1.84) |
29 (1.14) |
30-0035SW |
|
45 |
47 (1.84) |
34 (1.34) |
30-0045SW |
|
55 |
47 (1.84) |
41 (1.60) |
30-0055SW |
|
75 |
51 (2.01) |
41 (1.60) |
30-0075SW |
|
100 |
59 (2.34) |
45 (1.77) |
30-0100SW |
|
250 |
83 (3.25) |
57 (2.25) |
30-0250SW |
|
500 |
104 (4.09) |
63 (2.49) |
30-0500SW |
|
1000 |
127 (5.00) |
89 (3.51) |
30-1000SW |
|
1500 |
152 (6.00) |
108 (4.25) |
30-1500SW |
*For the matching crucible cover part number, simply add the letter “C” to the end of the crucible part number.
Please click here for information on Inconel Corrosion Resistance.
